![](/images/new-backgrounds/1143795/14379557x1.webp)
To change the port setting, click on the ID parameter to enter to the selected port to configure its Speed/Disable, Flow control and QoS setting.
Figure 18
Speed/Disable:
This setting has six modes— 100M Full, 100M Half, 10M Full, 10M Half, Auto and Disable— for speed or port disable selections.
Flow Control:
This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to Enable for avoiding data transfer overflow. Or it sets to Disable; there is either no flow control or other hardware/software management.
When the port is set to forced mode, then the flow control will automatically set to Disable.
26