D-Link DSA-3200 warranty Click Next Setup Wizard is Now Complete, Using The Setup Wizard continued

Using The Setup Wizard (continued)

Specify the DHCP Server Settings.

Specify a range of IP addresses to assign the DHCP clients. The range is entered in the format “Start IP – End IP” i.e. 192.168.2.101 – 192.168.2.200. Enter the Domain Name and Primary DNS Server settings for the clients. Entering a Secondary DNS Server is optional.

Click Next

Setup Wizard is Now Complete

Click the Restart Link to complete the configuration Wizard and apply settings. The DSA-3200 will Restart after clicking the restart link. Reboot time will take approx. 1.5 ~ 2 Minutes.

Click Restart

Note: If you are unable to browse the Internet after setting up your DSA-3200, release and renew your Dynamic IP and verify that you receive a valid DNS server address.

8