![](/images/new-backgrounds/1299149/29914987x1.webp)
Advanced > Routing > Static Route
The Routing table, shown to the right, allows you to enter static routes between computers on both the WAN (Internet) and your LAN.
IP Address | Enter the IP Address of the subnet or device where packets are |
| to be routed. |
Subnet Mask | Enter the subnet mask corresponding to the IP address entered |
| above. |
Gateway | Enter the IP address of the gateway used for packets that are |
| to be routed to the IP address entered above. |
Interface | Select the WAN (Internet) or LAN interface. |
Metric | Enter the number of hops (the number of routers) that packets |
| will be allowed to cross when being routed to the IP address |
| entered above. |
State | Use this |
43