GETTING STARTED
Please note that this type of installation requires that your ISP or Network Administrator can give you a static IP address for each computer. Please consult the documentation that comes with your Access Point to determine its necessary configuration.
To complete this installation, please follow these steps:
1.Install the access point and connect it to your cable/DSL modem.
2.Install the wireless adapter - see the Quick Install Guides.
3.Check the wireless connection- see Configuration Utility and Networking Basics section.
4.Set Static IP Address for the wireless adapter - see Networking Basics section.
NOTE: If you are using a PPPoE client, go to “Networking Basics section” instead. Verify the settings with your ISP or Network Administrator if necessary.
5. Learn to share printers and files - see Networking Basics.
6