D-Link DWL-810+ manual Assigning a Static IP Address in Windows, Appendix, Click OK

Appendix

Assigning a Static IP Address in Windows

To assign a Static IP Address to the laptop or computer that you are using to configure the DWL-810+, please do the following:

Note: The following screens are taken using

Windows XP. Your screens may look similar.

Go to Start > Double- click on Control

Panel > Double-click on Network

Connections > Right-click on Local

Area Connections > Click Properties

Highlight Internet Protocol (TCP/IP)

Click Properties

Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window

Input your IP address and subnet mask. (The IP Address must be within the same range as the DWL-810+. The IP Address of the DWL-810+ is 192.168.0.30. You can assign 192.168.0.51 for your computer. No two computers can have the same IP Address. Assign a subnet mask of 255.255.255.0.)

Click OK

10