D-Link DWL-G680 Using the Configuration Utility

DWL-G680 User’s Manual

D-Link Systems, Inc.

Using the Configuration Utility

Using the Configuration Utility

If you are using Windows XP, you can use either the Zero Configuration Utility or the

D-Link Configuration Utility.

To use the D-Link Configuration Utility with XP,

right-click on the wireless network icon in the

taskbar in the lower right-hand corner of your

computer screen.

You can then use the D-Link Configuration Utility with

XP by right-clicking on the white D-Link Configuration

Utility icon.

If the icon does not display in the taskbar, then click on

this icon on your desktop to open.

D-Link DWL-G680 Wireless 108G Notebook Adaper uses the Configuration Utility

as the management software. The utility provides the user an easy interface to change

any settings related to the wireless adapter. After you have completed the installation of

the DWL-G680 (refer to the

that came with your purchase)

whenever you start the computer, the Configuration Utility starts automatically and

the system tray icon is loaded in the toolbar (see illustration below.*) Clicking on the

utility icon will start the Configuration Utility.