Dacor DR3GIFS 10” min. (25.4 cm), to any combustibles, Non-combustible, Rear wall or, 3/4” min. (1.9 cm), above counter both sides, countertop edge, countertop overhang, max

DR30GS, DR30GFS, DR30GIS, DR3GIFS

Document # PG05-007		Revised 09/13/12 Page 3/4
	Distinctive 30” Wide	PLANNING
	All Gas Ranges	GUIDE

Self-Rimming Installation Cutout Options (Models DR30GIS and DR30GIFS Only)

All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted.

For all self-rimming installations:

Countertop height: 34 3/4” (88.3 cm) min. 36 7/8” (93.7 cm) max.

Countertop thickness: 1 5/8” (4.1 cm) max.

10” min. (25.4 cm)			10” min. (25.4 cm)	*
to any combustibles	Non-combustible	*	to any combustibles	Rear wall or		3/4” min. (1.9 cm)
above counter both sides	rear wall required		above counter both sides	countertop edge	countertop overhang

255/8”

max.

(65.1 cm)

29 1/4” (74.3 cm) countertop opening

30” (76.2 cm) cabinet opening below countertop

Notch countertop to width of cabinets

Cabinet face

below countertop

				21”
	20	3/4”	(53.3		cm)
(52.7 cm)				to
				24”
			(61.0		cm)

21

1/8”

25 3/4”

20

7/8”

(53.7 cm)

29 1/4” (74.3 cm)

(65.4 cm)

(53.0 cm)

to

countertop opening

max.

30” (76.2 cm)

24 1/8”

cabinet opening

(61.3

cm)

below countertop

Notch countertop

t

o width of cabinets

Cabinet face

Countertop front

below countertop

Cabinets Less Than 24” Deep, 3 1/4” Side Panels Installed, Range Back Flush to Wall (Top View)

10” min. (25.4 cm)	Non-combustible
to any combustibles
	rear wall required*
above counter both sides

Cabinet Depth Greater Than 24” **

3 1/4” Side Panels Installed, Range Back

Overhanging Countertop (Top View)

10” min. (25.4 cm)	Rear wall*or	3/4” min. (1.9 cm)
to any combustibles	countertop edge
above counter both sides		Countertop overhang

29 1/4” (74.3 cm)

countertop opening

24”

29 1/4” (74.3 cm)

24

1/8”

30” (76.2 cm)

(61.0

cm)

countertop opening

cabinet opening

30” (76.2 cm)

(61.3

cm)

cabinet opening

below countertop

below countertop

Cabinet face

Cabinet face

below countertop

below countertop

Notch countertop

Notch countertop

overhang to width

of

cabinets

Countertop overhang

o

verhang to width of

cabinets

Countertop overhang

1 5/8” (4.1 cm) max.

1 5/8” (4.1 cm) max.

Cabinet Exactly 24” Deep, 3 1/4” Side Panels

Cabinet Depth Greater Than 24” **

Removed, Range Back Flush to Wall (Top View)

3 1/4” Side Panels Removed, Range Back

Overhanging Countertop (Top View)

*On models DR30GIS and DR30GIS, non-combustible surface required immediately behind range, as specified on previous page, when back of backguard is less than 2 1/2” (6.4 cm) from rear wall.

**Models DR30GIS and DR30GIS include self-rimming trim piece that attaches to back of range and covers the edge of the countertop overhang in back.

***To create a “built-in look” on the front of the cabinet, this dimension may be changed to 29 1/4” (74.3 cm). This configuration is only for models DR30GIS and DR30GIS with side panels behind door removed.

All specifications subject to change without notice. www.dacor.com Phone: (800) 793-0093