Installation Requirements
Door Panels and Cabinetry Clearance - Door Swing 110°
The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see Door Swing 90° on following page.
Refrigerator to
Cabinetry Clearance
Door swing 110° actual size
Refrigerator
Side Trim
1 ½"
(3.8 cm)
1 ¼"
(3.2 cm)
1"
(2.5 cm)
Cabinetry
Hinge
½" (1.3 cm)
¾" (1.9 cm)
¼" (6.35 mm) ½" (1.3 cm)
¾" (1.9 cm) 1" (2.5 cm)
NOTE: Allow ½ (1.3 cm) clearance between overlay panel and cabinetry.
NOTE: Rout the hinge side of the custom door panels to a radius that is equal to at least half the thickness of the panel if a 130° door swing is desired. See Adjust Doors.
1"
(2.5 cm)
| Backer | Overlay | 1 ¼" | |
|
|
| ||
|
|
| (3.2 cm) | |
Door |
|
| 1½" | |
|
| Panel | ||
Panel | (3.8 cm) | |||
|
| |||
|
|
| ||
Spacer Panel
When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.
7