Operating Your Appliance
Setting Up the Display (Set-up Mode)
In
Changing the temperature scale (ºF or ºC)
You can select the temperature scale that the unit uses to display the temperature settings:
•Push and hold the LIGHT button for about five seconds to enter
•Push the UP or DOWN button repeatedly until the degree symbol “ º ” flashes on the display.
•Push the LIGHT button. “ ºF ” or “ ºC ” will flash on the display.
•Push the UP or DOWN button until the desired temperature scale flashes on the display. Push the LIGHT button to select the desired temperature scale.
•Push the ON/OFF button to exit
Within about two minutes, the appliance will change the temperature scale on the display.
Changing the Display Brightness
•Push and hold the LIGHT button for about five seconds to enter
•Push the UP or DOWN button repeatedly until an “h” flashes on the display. Push the LIGHT button. The current display brightness level, from 1 to 5 will flash on the display. h1 is the lowest level. h5 is the highest level.
Turning on the Fan
When storing wine for long periods of time, turn on the fan. The fan will increase the humidity level, which prevents bottle corks from drying out. The fan will run continuously until turned off.
•To turn on the fan, push the LIGHT and ALARM buttons at the same time.
•When the fan is on, pushing the LIGHT and ALARM buttons at the same time turns it off.
Alarm
The alarm helps to protect your wines against excessive temperature fluctuations. The alarm sounds when the door is open for longer than about 60 seconds. It also sounds when the interior gets too warm or too cold. The temperature display will also flash. It will continue to flash until the temperature problem has been fixed, even if the alarm has been muted.
•To mute the alarm, push the ALARM button.
Interior Lighting
You can set the interior lighting so that it is on all the time, or so that it comes on only when the door is open.
To make the light stay on (or turn off) when the door is closed:
•Push the light button.
•Push the UP or DOWN button repeatedly until the desired brightness level flashes on the display. Push the LIGHT button to select the desired brightness level.
•Push the ON/OFF button to exit
5