ER30G
Revised 10/08/08
30” Wide, Epicure™ |
| PLANNING |
All Gas Range | 2/2 | GUIDE |
All tolerances +1/16”
B
Model Number | “A” | “B” | |
ER30G | 30 1/16” (764mm) | 30” (762mm) Minimum | |
36” (914mm) Recommended | |||
|
|
30” (762mm)
min.*
**
A
Suggested location of utilities***
*Vertical to combustible surface
**Cabinet depth is at discretion of customer but cabinet face MUST NOT protrude further than rear of front panel, see product dimesions
***Consult local code for exact location requirements.
NOTES:1.Utilities may be located in the lower left corner of the adjacent right cabinet. (Recommended)
2.Contact your local building department to verify compliance with local code interpretation.
Cutout dimensions
GAS SUPPLY PRESSURE REQUIREMENTS
Gas | Manifold | Min. Gas Supply | Max. Input |
Type | Pressure* (WC) | Pressure (WC) | Pressure |
Natural | 5” | 6” | 1/2 p.s.i. |
LP | 10” | 11” | 1/2 p.s.i. |
IMPORTANT: The information above is for reference only. If the above data does not agree with the product data label, use the data on the product data label on top of the kick plate below the door (remove the door according to the installation instructions to view it).
The gas connection is located on the back of the unit as shown.
121/2”
(31.8 cm)
to 14 5/8”
(37.1 cm) 
2 5/8” (66.7 cm)
back of range
Web: http://www.Dacor.com | Specifications are subject to change without notice. | 5.6 |
Corporate Phone: | See installation instructions for additional details. |