ER36D, ER48D

Revised

Epicure® Ranges

PLANNING

GUIDE

03/10/09

2/2

F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13” (3

30mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max.5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Non-combustible

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

surface along

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

back wall

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

recommended

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30”

(762mm)

 

G

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2, 5

 

 

 

Min.1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

Suggested

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

location of

 

 

 

 

 

 

 

 

 

36 1/2”

 

 

 

 

 

 

 

 

 

 

utilities4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(927mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Max.

 

 

 

 

 

 

 

 

 

 

1 Vertical to combustibles directly above cooking surface;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

if installing an overhead vent hood, also check the hood

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

specifications for minimum required clearances.

2Measured from range top panel.

3Cabinet/countertop depth is at discretion of customer but cabinet face MUST NOT protrude further than rear of front

panel, see product dimensions.

4Consult local code for exact location requirements.

5Not applicable for cabinets more than a horizontal distance of 10” (254mm) from the edge of the range.

 

Backsplash

 

Minumum Countertop Height:

 

 

 

 

 

 

 

30 1/4” (768 mm)

 

 

 

 

 

 

 

Maximum Countertop Height:

 

 

 

 

 

 

 

 

 

 

 

2 13/16"

 

36 1/2” (927 mm)

 

 

 

 

 

 

3/8" (10 mm)

 

(71.4 mm)

 

 

 

 

 

 

non-combustible

Min. flat countertop

 

overhang

 

Tolerances: +1/16”, -0, (+1.6mm, -0) unless otherwise stated

Gas and Electrical Service

For replacement purposes, the location of the existing utilities may be utilized provided they do not interfere with the sides or rear of the range. Check local building codes for permissible locations.

An external manual shut-off valve must be installed between the gas inlet and the range, for the purpose of turning on or shutting off gas to the appliance.

The installation must allow for the following:

Access to the gas shut-off valve when the unit is installed.

Access to the remote circuit breaker panel/fuse box, when the range is in place.

The gas supply piping and shut-off valve, and the electrical junction box/receptacle must be located so they do not interfere with the range when it is installed.

The junction box and gas shut off valve must be located so that the range can be pulled out for service while the appliance remains connected.

CUT-OUT DIMENSIONS

Range Model

“F”

“G”

“H”

ER36D

42” (1067mm)*

36 1/16”

33 1/2”

36” (914mm)**

(916mm)**

(848mm)

 

ER48D

54” (1372mm)*

48 1/16”

43 1/2”

48” (1219mm)**

(1221mm)**

(1102mm)

 

* Recommended

**Minimum

rear wall recommended

H

10" (254 mm) Min.

3to combustible side walls above the range (both sides)

G

Cutout with optional erv raised vent

(top view)

APPROVED RAISED VENT MODELS

Stiffener

3/8” Min. (10 mm) space behind raised vent chassis to clear stiffener

ERV36-ER or ERV48-ER raised vent

3/8” Min. (10 mm)

flat countertop overhang

required behind cutout Countertop*

Cabinet face**

Back of

control panel

ER36D or ER48D Range

Countertop height:

30 1/4" (768 mm) Min.

36 1/2” (927 mm) Max.

Raised Vent Model

For use with

* IMPORTANT: See “CUTOUT WITH OPTIONAL ERV RAISED VENT”

for countertop cutout dimensions.

** IMPORTANT: Cabinet face must not stick out further than

Range Model

ERV36-ERER36D

ERV48-ERER48D

Web: http://www.Dacor.com

Corporate Phone: 800-793-0093

back of control panel.

Raised vent installation side view

Specifications are subject to change without notice.

5.16

See installation instructions for additional details.