Dacor ILHSF8, ILHSF10, Planning, Inline BlowersGUIDE, Model, Power, Blower Rating, Number

ILHSF8, ILHSF10

Revised 06/19/08

PLANNING

Inline BlowersGUIDE

2/2

Model	Power	Blower Rating***
Number*	Requirements**
ILHSF8	120 Vac, 60 Hz,	600 CFM
	3.5 Amp
ILHSF10	120 Vac, 60 Hz,	1200 CFM
	4.5 Amp

* All models are thermally protectd

** In addition to the hood or raised vent

*** At 0 inches static pressure

warning

To avoid the risk of fire due to the unit overheating:

◊DO NOT install this blower with a hood or raised vent that has an internal blower.

◊DO NOT install more than one blower to increase the length of the duct run. Even small differences between blower air flow rates can greatly reduce the air draw by the hood or raised vent.

NOTE:

1.The above specifications are for reference only. See the data label on the blower for exact specifications. If the above specifications vary from the label on the blower, use the data on the blower label.

Knock-out

Knock-out

Electrical Access Knock-outs

Model Number	Weight
ILHSF8	22 lbs. (10 kg.)
ILHSF10	31 lbs. (14 kg.)

Web: http://www.Dacor.com	Specifications are subject to change without notice.	9.7
Corporate Phone: 800-793-0093	See installation instructions for additional details.