Operating Your Appliance
The Control Panel
| | |
| ||
| | |
|
|
Temperature setting buttons
Temperature display
ON/OFF button
FAN on/off button
ALARM on/off button
Turning the Power ON and OFF
•Clean your appliance before turning it on for the first time. See the Cleaning and Maintenance section.
•Connect the power cord to the electrical outlet.
The unit will come on.
•The alarm will sound and the temperature
display will flash because the beverage compartment is warm when you first turn it on (see the Alarm section for details). Push the ALARM button to turn the alarm off while compartment is cooling down to operating temperature. The temperature display will continue to flash until the interior has cooled.
•To turn the unit off: Push and hold the ON/OFF button for about three seconds. The display will turn off to indicate that the appliance is off.
•To turn it on: Push the ON/OFF button until the display lights up.
Setting the Temperature
•Push the UP or DOWN button to raise or lower the temperature. You can change the settings in increments of 1°F (or 1°C). The temperature setting will flash on the display while you change it.
•After 5 seconds the display will stop flashing and the actual temperature of the compartment will be displayed.
Control Panel Settings (Set-up Mode)
In
Changing the temperature scale (ºF or ºC)
You can select the temperature scale that the unit uses to display the temperature settings:
•Push and hold the FAN button for about five seconds to enter
•Push the UP button until the degree symbol “ º “ flashes on the display.
•Push the FAN button. ºF or ºC will flash on the display.
•Push the UP or DOWN button until the desired temperature scale flashes on the display. Push the FAN button to select the desired temperature scale.
•Push the ON/OFF button to exit
Within about two minutes, the appliance will change the temperature scale on the display.
To change the display brightness
•Push and hold the FAN button for about five seconds to enter
•Push the UP button until an “h“ flashes on the display. Push the FAN button. The current display brightness level, from 1 to 5 will flash on the display. h1 is the lowest level. h5 is the highest.
•Push the UP or DOWN button until the desired brightness level flashes on the display. Push the FAN button to select the desired brightness level.
•Push the ON/OFF button to exit
4