Care and Cleaning

Slide mounting bracket under clip on slide.

Push in on tab.

Clip on slide

Slide

Pull up on drawer front.

Push drawer front down until tab locks in place.

 

Drawer Removal
Drawer Installation

 

 

 

 

 

 

 

Before You Call for Service

 

 

 

 

 

 

 

Problem Solution Guide

 

 

 

 

 

 

 

 

problem

may be caused by

what to DO

 

 

Nothing works.

Power plug disconnected.

Connect plug to a dedicated, grounded, three-

 

 

 

 

prong electrical outlet.

 

 

 

Timer is not set.

Select time duration according to the

 

 

 

 

Operating Instructions section.

 

 

 

 

 

 

 

 

Warming drawer is not connected

Plug the warming drawer into a 120 Vac,

 

 

 

to power.

15 amp, dedicated electrical outlet.

 

 

 

 

 

 

 

 

Tripped circuit breaker or blown

Check the house circuit breaker or fuse for

 

 

 

fuse.

the circuit that supplies power to the warming

 

 

 

 

drawer.

 

 

 

 

 

 

 

Drawer does not slide smoothly

Drawer is incorrectly mounted into

Remount drawer into slide, per instructions

 

 

or drags.

slide mechanism.

above.

 

 

 

 

 

 

 

 

Drawer is over-loaded or the load

Reduce the weight to less than 50 pounds.

 

 

 

is unbalanced.

Redistribute drawer contents.

 

 

 

 

 

 

 

Excessive condensation.

Warming drawer not preheated.

Preheat the warming drawer before each use.

 

 

 

 

 

 

 

 

Incorrect humidity control setting.

Set humidity control to CRISP to allow mois-

 

 

 

 

ture to vent.

 

 

 

 

 

 

 

One or more of the indicator

The control panel computer has

Try resetting the computer. Disconnect the

 

 

lights on the control panel blink

detected an error:

power cord, wait 20 seconds, then reconnect

 

 

on and off (one second on, one

#1 - Temperature error

it. Check the control panel. If the indicator

 

 

second off).

#2 - Sensor error

light still flashes, call the Dacor Customer

 

 

 

#3 - Key pad error

Service Team at (800) 793-0093.

 

 

 

#4 - Control error

 

 

 

 

 

 

 

7