Daewoo 103FH manual Self Diagnosis

ICON CONTROL FUNCTION

PIN W CONTROL Adjust the pin W control when the sides of the screen are in a W shape.

ROTATION	Adjust the rotation when the screen is
	tilted left or right.
DEGAUSS	Degaussing keeps the monitor free from
	unwanted magnetism that can result in
	color impurity.
STATUS	Display horizontal & vertical frequency
	and polarity.
POWER SAVER	YES : VESA DPMS operation.
	NO : NO DPMS operation.
	Display a RGB Color Bar to determine
TEST PATTERN	whether the screen color is expressed
	normally or not.
BNC/D-SUB	Select a input signaling type between D-
	sub and BNC connector.
RECALL	Reset the screen to the Factory Preset
	Display Settings.

Self Diagnosis

When the monitor doesn’t display, if you press any key, Self Diagnosis screen is displayed. Self Diagnosis function checks if the status of the monitor is No Signal or Out of range.

No Signal screen is displayed when the D-Sub signal connector is not connected or the status of the monitor is on DPMS mode.

Out of Range screen is displayed when the applied frequency is under or over normal range.

Normal range

H : 30 - 107 KHz

V : 50 - 160 Hz

English - 10 English - 11