Continuous drainage
On the rear of the unit, remove the drain plug carefully (see picture below). Push the hose onto the connector located inside of the hole.
The hose should go down smoothly without bends or kinks.
Place the end of the hose into a suitable drainage facility.
Remove the drain plug
Push the hose into the drain hole
Attach the drain plug to the drain hole of the water tray.
Note: Make sure the drain plug is completely inserted.
MAINTENANCE
Important:
Be sure to unplug the unit before cleaning.
Do not use petrol, thinners or other chemical agents to clean the unit as this may damage the unit.
Do not wash the unit directly under a tap or hose. The electrical components inside may be damaged and the unit become unsafe as a result.
Air filter !
Clean the air filter at least once every two weeks to prevent impaired performance of the unit.
Removal
Pull the water tankt out as shown (Figure A), and pull the Air Filter down as shown (Figure B).
Cleaning
Wash the air filter with clean water, and then carefully dry.
5
