QuickStarting Guide
1. Connecting to an External Power Source
Connect the power cord (supplied with the player) to the side input plug and to a wall outlet. Do not use any other device otherwise specified by your dealer.
2. Open the protective cover
The cover opens only to a maximum 135o , so please do not try to open it any further.
3. Press the open button on the left to open the disc cover
Never press the OPEN button on the left during playback.
4. Inserting a DVD disc
Align the centre of the DVD disc with the centre of the disc guide. Press gently down on the DVD to snap the disc into place, then close the disc cover.
5. Slide the side power switch to ‘ON’.
5
!
If you want to replace the disc or if you want to remove the disc, you should press STOP twice, wait until disc has finished spining, then press the OPEN button, and take it out.
Quick Starting Guide
6.Press the PLAY button on the player face (Depends on the DVD title, press the ENTER button)
In general, the DVD already inserted into the player will start reading
automatically when power is turned on.
The DVD player will immediately start rendering the DVD program.
When you want to stop, press the STOP button, it will return to the logo. To power off the unit, slide the ON/OFF switch to the OFF.
!
The DVD player will automatically power off in 20 minutes after entering screen saver mode. To reset the unit, first slide power switch to ‘OFF’, and then slide it to ‘ON’.
ON/OFF
1112
