![](/images/new-backgrounds/1126024/126024137x1.webp)
Service manual
I810
CONTROLLED
RECTIFIER
6V DC |
|
| ||
|
|
| ||
HIGH |
|
|
| R829 |
|
| |||
R830 |
|
R820
C830
HIGH
Q807
Q808
LOW
HIGH
Q809
POWER LOW
Fig : I810 controlled rectifier switching circuit
* TV set
-On
-So, Q809 collector is set to high.
-Then, I810 controlled rectifier gate pin is set to high and I810 is conducting.
-So, current flows from pin 16 SMPS transformer to the ground via I804 optocoupler and Q810 and Q811 transistors (which are conducting).
-In these conditions, I801 delivers pulses on light mode and T801 produces voltages with reduced power.
-As I810 is conducting, current flows also from pin 16 SMPS transformer to I823 (5V / 3.3V regulator) for I501
com, IR receiver and front mask buttons supply voltage (then, remote control or front mask buttons can be activated to leave