![](/images/new-backgrounds/1137544/13754423x1.webp)
Video Connection
Connecting with an External Source
You may connect
Connection is not necessary in Mono mode.
Connect either
Note
The stated connection does not comply with recording TV programs. You must make the connection to the Antenna input socket as shown below for recording.
Connecting with an Antenna
The following connection allows you to record TV programs.
ANT/CABLE 1
Connection Guide
1.Connect the antenna to the antenna input of the video
2.Make a connection of Antenna Output on Video and Antenna Input on TV with the coaxial cable provided.
Operating Instructions
1.Adjust the channel selection switch at the rear side of the Video to 3 or 4.
2.Turn on the TV set, and adjust the channel to 3 or 4, to the number adjusted for step1.
3.Turn on the Video, insert the videocassette, and press the Play button.