ALIGNMENT INSTRUCTION
1. SERVICE MODE ADJUSTMENTS
Follow the steps below whenever service adjustment is required.
See Table- A and Table- B to determine if service adjustments are required.
1)How to enter the service mode using the user remote control.
-Turn the set on.
-Direct the remote control to the reception window of TV.
-Push buttons of remote control in sequence as follows.
1→ MUTE → DISPLAY → MUTE
-Then, the screen will appear as follows.
SERVICE 72
SERVICE 02
SERVICE 03
SERVICE 04
SERVICE 05
SERVICE 06
SERVICE 07
SERVICE 08
SERVICE 09
SERVICE 10
SERVICE 11
SERVICE 12
V W SELECT C B ADJUST L EXIT
-Using the channel up or channel down button, select the item you wish to adjust. (The color of selected item turns into the blue.)
-Press the volume up or down button to enter in the service mode you wish to adjust.
2)How to memorize the adjusted values in the service mode.
-Don’t have to press any button the state which the screen is displaying each of service menus after all adjustments are completed each of all service menu.
PART |
| ADJUSTMENT |
| NOTES | |
|
| ||||
REPLACED |
| NECESSARY | UNNECESSARY |
| |
|
|
| |||
I701 |
|
| O | Data is stored in I702. | |
|
|
|
|
| |
|
|
|
| Initial setting values are written from I701. | |
I702 |
|
|
| ADJUSTING ITEMS | |
(EEPROM) |
| O |
| S6 | : Geometry adjustmrnt |
|
|
|
| S8 | : White balance |
|
|
|
| S9 | : Subbrightness |
|
|
|
|
| Adjust items related to picture tube only. |
CRT |
| O |
| (White Balance adjustment) | |
|
|
|
| CRT OPTION (Screen Option adjustment) | |
|
|
|
|
|
|
