C H A P T E R
6
Troubleshooting
Your Daewoo television is designed to give you
If the suggestions listed below do not solve your problem, contact your Daewoo deal- er or an authorized Daewoo service center. You can also call Daewoo directly at
There is no picture or sound, or the TV won't turn on.
¥Make sure the TV is plugged in.
¥Make sure the MUTE is not set.
¥Make sure the power is on.
¥If there is neither picture or sound, unplug the TV for 30 seconds, then plug it in and try again.
There is no picture or sound on some UHF channels.
¥Try another station. If the other stations are OK, it may be a station problem.
¥Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.
¥See if anything is interfering with the antenna signal.
¥Make sure the AIR/CABLE setting is correct.
The sound is OK, but the picture is poor.
¥Try another station. If the other stations are OK, it may be a station problem.
¥Check that the antenna is connected and is in good working order, has no broken wires, and is adjusted correctly.
The picture is OK, but the sound is poor.
¥Try another station. If the other stations are OK, it may be a station problem.
¥Check that the antenna is connected, is in good working order, has no broken wires, and adjusted correctly.
There is poor reception on some channels.
¥Try another station. If the other stations are OK, it may be a station problem.
¥Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.
You cannot tune to a cable channel.
¥Make sure the AIR/CABLE setting is correct.
¥The channel may not be programmed into memory.
The picture rolls, slants, shows lines, is grainy, has poor color, or has ghosts.
¥Try another station. If the other station are OK, it may be a station problem.
¥Check that the antenna is connected, is in good working order, has no broken wires, and is adjusted correctly.
¥See of anything is interfering with the antenna signal.
The remote control does not work.
¥Make sure the TV is plugged in.
¥Make sure there are fresh batteries in the remote control.
¥Make sure there is nothing blocking the remote control signal.
Chapter 6 : Troubleshooting 21
