KOR-1A0A/1A0ASLOS(¿ )-Desuk02.4.153:25PM˘ ` 2

EARTHING INSTRUCTIONS

This appliance must be earthed. In the event of an electrical short circuit, earthing reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a earthing wire with a earthing plug. The plug must be plugged into an outlet that is properly installed and earthed.

WARNING: Improper use of the earthing plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the earthing instructions are not completely understood, or if doubt exists as to whether the appliance is properly earthed. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3- blade earthing plug, and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be equal to or greater than the electrical rating of the appliance.

INSTALLATION

1

2

Steady, flat location

This oven should be set on a steady, flat surface. This oven is designed for counter top use only.

Leave space behind and side

All air vents should be kept a clearance. If all vents are covered during operation, the oven may overheat and, eventually, oven failure.

3 Away from radio and TV sets

Poor television reception and radio interference may result if the oven is located close to a TV, Radio antenna, feeder and so on.

Position the oven as far from them as possible.

4 Away from heating appliance and water taps

Keep the oven away from hot air, steam or splash when choosing a place to position it, or the insulation might be adversely affected and breakdowns occur.

5 Power supply

Check your local power source. This oven requires a current of approximately 5 amperes, 230V 50Hz.

Power supply cord is about 1.1 meters long.

The voltage used must be the same as specified on this oven. Using a higher voltage may result in a fire or other accident causing oven damage. Using low voltage will cause slow cooking. We are not responsible for damage resulting from use of this oven with a voltage of ampere fuse other than those specified.

This appliance is supplied with cable of special type, which, if damaged, must be repaired with cable of same type.

6 Examine the oven after unpacking for any damage such as:

A misaligned door, Broken door, A dent in cavity. If any of the above are visible, DO NOT INSTALL, and notify dealer immediately.

7 Do not operate the oven if it is colder than room temperature.

(This may occur during delivery in cold weather.) Allow the oven to become room temperature before operating.

2

Page 3
Image 3
Daewoo 1A0ASL, KOR-1A0A manual Earthing Instructions

1A0ASL, KOR-1A0A specifications

The Daewoo KOR-1A0A and KOR-1A0ASL are advanced models of the South Korean multi-role combat vehicle series, well-regarded for their robust performance and modern technology integration. Designed and manufactured by Daewoo Heavy Industries, these vehicles are engineered for versatility in various operational contexts, including reconnaissance, command and control, and troop transportation.

One of the primary features of the KOR-1A0A and KOR-1A0ASL is their high mobility. Both models are equipped with powerful engines that provide excellent acceleration and maneuverability across diverse terrains. This capability is further enhanced by the vehicle's advanced suspension system, which allows for smooth rides over rugged landscapes, thereby enabling safe and swift movement for soldiers in the field.

In terms of protection, the KOR-1A0A and its SL variant are armored vehicles designed to safeguard their occupants from various threats. The hulls are constructed from composite armor, offering resistance against small arms fire and shrapnel, while the addition of reactive armor capabilities further bolsters defensive measures against anti-tank weapons. These innovations ensure that crews remain safe during engagements and can maintain operational effectiveness.

The vehicles are also outfitted with state-of-the-art electronic systems, including advanced communication and command technologies. This enables real-time information sharing and coordination among units, enhancing situational awareness and leadership capabilities during missions. The KOR-1A0ASL variant, specifically, boasts improved sensor packages and battlefield management systems, allowing for seamless integration into modern network-centric warfare.

Armament options for the KOR-1A0A and KOR-1A0ASL include a variety of weapons systems, catering to different operational requirements. These can range from machine guns for infantry support to more powerful systems for direct engagements with enemy armor. The flexibility in armament choices ensures that these vehicles can adapt to various combat scenarios effectively.

Overall, the Daewoo KOR-1A0A and KOR-1A0ASL represent a significant advancement in South Korea’s armored vehicle capabilities. With their focus on mobility, protection, and advanced technology, these combat vehicles are well-suited to meet the demands of modern warfare, ensuring reliability and operational superiority on the battlefield.