Danby DAR1102W manual Difficulty, Possible Cause, Suggested Solution, Care and Maintenance

Care and Maintenance

Frequently, a problem is minor and a service call may not be necessary, use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number for assistance.

Difficulty	Possible Cause	Suggested Solution
Does not work	No power to unit.	Check connection of power cord to
		power source.
	Power cord is unplugged.	Plug in unit.
	Wrong voltage is being used.	Use proper voltage.
Fridge runs continously	Temperature control too high.	Lower Temperature Control.
	Door is not closed.	Close door securely.
	Hot food inserted.	Be sure that food is at room temperature before inserting.
	Door opened too long	DO NOT keep door open for too long.
	or too often.	MINIMIZE door openings.
	Close proximity to heat source	DO NOT place unit close to heat sources
	or direct sunlight.	or direct sunlight.
Internal temperature	Temperature control too high.	Lower Temperature Control
too cold
Internal temperature	No power to unit.	Check connection of power cord to
not cold enough		power source.
	Power cord is unplugged.	Plug in unit.
	Temperature control too low.	Check setting and increase as needed.
	Door is not closed.	Close door securely.
	Hot food inserted.	Be sure that food is at room temperature
	Door opened too long	DO NOT keep door open for too long.
	or too often.	MINIMIZE door openings.
	Air flow obstruction.	Allow room for air to circulate around unit.
	Wrong voltage is being used.	Use proper voltage.
	Close proximity to heat source	DO NOT place unit close to heat sources
	or direct sunlight.	or direct sunlight.
Light will not work	No power to unit.	Check connection of power cord to
		power source.
	Power cord is unplugged.	Plug in unit.
	Bulb is loose, needs replacing	Tighten or replace the bulb. Check the
	or the door switch is stuck.	switch for obstructions and clean.

4