INSTALLATION INSTRUCTIONS
FEATURES
A) Wire Cantilever Shelves
(Number and type of shelves depends on the model) Shelf
can be optionally placed on the guides inside the appliance.
It is protected against being pulled out accidentally. If you
want to remove a shelf, slightly lift up the front part and pull it
out. Perishable foods should be stored towards the back/rear
of the shelves.
B) Door Liner
The door liner consists of various shelves or holders used for
storing eggs, cheese butter and yogurt as well as other
smaller packages, tubes, cans etc. The lower shelf is used
for storing large bottles.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cooling plate
mounted in the rear wall. Under the plate there is a channel
and the outlet for defrost water.
Regularly check the defrost water outlet and the drain chan-
nel for blockage. They should always be kept free and clean
of food particles. If the drain outlet does become clogged,
use plastic straw to clean it. A
C
B
If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory.
CHANGING THE DIRECTION ON
THE DOOR SWING
4