INSTALLATION INSTRUCTIONS
LOCATION
DO:
• Select a location with a strong, level floor.
• Allow 5 inches of space between the back of the appliance and any adjacent wall.
• Avoid direct sunlight and heat. Direct sunlight
may affect the acrylic coating. Heat sources nearby will cause higher electricity consumption.
DO NOT:
• Use this appliance outdoors: this appliance is intended for household use only. Do not attempt to operate or store this appliance outdoors.
• Build this appliance into an enclosure: this appliance is designed for a
DOOR REVERSAL
INSTRUCTIONS
1)Unplug the unit from the electrical outlet (if
connected) and lay it on its back. | 6) Carefully reposition the door on the unit and push |
| up until the top hinge pin is inserted into the top of |
2)Remove the screws from the lower hinge assembly. the door.
3) Pull the door downward to remove it from the | 7) While the door remains closed, install the lower |
beverage center. | hinge assembly. |
4) Remove the upper hinge pin from the top left side | 8) Close the door and return the unit into its upright |
of the unit and reinstall it on the top right side. | position (wait 60 minutes before reconnecting power |
5) Remove the plastic cap from the left side of the | to the beverage center), verify the door alignment and |
proper seal against the unit. | |
door frame and reinstall it on the right side of the |
|
door frame (the previous pin location). | LOWER HINGE ASSEMBLY |
| AND DOOR SUPPORT BRACKET |
UPPER HINGE PIN |
|
3
