Danby DCR122WDD manual Troubleshooting, Problem, Possible Cause, Possible Solution, Po Si, Ause

TROUBLESHOOTING

Occasionally, a problem is minor and a service call may not be necessary- use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800-263-2629for assistance.

PR	EM	PO SI	AUSE	SOLUTI N
PROBLEM		POSSIBLE CAUSE		POSSIBLE SOLUTION
		• No power to unit.		• Check connection of power
1) Does not work.		• Power cord is unplugged.		cord to power source.
		• Wrong voltage is being used.		• Plug in unit.
				• Use proper voltage.
				• Set temperature control to
				warmer setting
		• Temperature set too low.		• Close door securely.
		• Door is not closed.		• Be sure food is at room
2) Refrigerator runs		• Hot food inserted.		temperature before inserting.
		• Door opened too long or too		• Minimize door openings/
continuously.
		often.		duration.
		• Close proximity to heat		• Do not place unit close to
		source or direct sunlight.		heat sources or direct
				sunlight.
				• Check connection of power
				cord to power source.
		• No power to unit.		• Plug in unit.
		• Power cord is unplugged.		• Check setting and increase
		• Temperature set too high.		as needed.
		• Door is not closed.		• Close lid securely.
3) Internal temperature not		• Hot food inserted.		• Be sure that food is at room
		• Door opened too long or too		temperature.
cold enough.
		often.		• Minimize door openings/
		• Air flow obstruction.		duration.
		• Wrong voltage is being used.		• Allow room for air to
		• Close proximity to heat		circulate around unit.
		source or direct sunlight.		• Use proper voltage.
				• Do not place unit close to
				heat sources or direct
				sunlight.

7