FEATURES
1)Thermostat Dial: For controlling the temperature inside the refrigerator. Turns the motor on as soon as the temperature rises above the desired level.
2)Freezer Compartment with Freezer Door: Separate freezer section holds ice cube tray and small items.
3)Ice Cube Tray: Ice cubes are easily removed from tray.
4)Plastic Coated Shelves: Odor resistant, rustproof, and removable for easy cleaning.
5)Drip Tray: Catches the water that drips off the evaporator when defrosting.
6)Magnetic Gasket: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.
7)Bottle Rack: For tall, medium, and large bottles, cans or jars.
8)CANSTORTM Door Liner: Holds 355mL cans of pop, juice, or beer.
21
5
4
8
6
7
ICE CUBE TRAY | 3 |
Ice cube tray is flexible. Twist tray to remove ice cubes. If the ice cube tray is frozen hard to the evaporator surface, run a little water over the tray. Never use a knife or other metal instrument to remove ice cube tray as this may damage the evaporator.
OPERATION
To avoid vibration, the unit must be set level. This is accomplished by adjusting the (1) front leveling leg located under the refrigerator. The temperature of the refrigerator is controlled by setting the thermostat knob to a desired setting.
Temperature Selection:
To start the refrigerator, turn the temperature control knob to the position corresponding to the desired cooling (on the graduated blue dial) in Fig. A. The refrigerator temperature will vary depending on the quantity of the food stored, and on the frequency with which the door is opened.
To turn the control to the OFF position, rotate the control knob to “0”. If the refrigerator is not being used for long periods, disconnect the plug and leave the door partially open. This will help to reduce mold and mildew from accumulating inside the refrigerator. Changes in ambient room temperature will affect internal refrigerator temperatures (choose correct setting of the thermostat knob).
In OFF (0) position, the appliance does not operate (cooling system is switched off) yet power supply is not interrupted (the light is on when you open the refrigerator door).
Fig. A
2
