OPERATING INSTRUCTIONS
When using the dehumidifier always make sure the water bucket is locked into place.
REMOVING COLLECTED WATER
There are 2 ways to remove collected water:
1Use the bucket. When the bucket is removed, the unit will shut off. Empty and replace the bucket.
NOTE: Support bucket with both hands when emptying.
2
Use a hose. Water can be automatically emptied into a floor drain by attaching a garden water hose (not included).
1.Remove the bucket from the front of the unit.
2.Open the drain cover on the side of the unit.
3.Thread a garden hose (not supplied) onto the nozzle, cut to length, and lead it to the floor drain.
NOTE: Use a hose that is no more than 5ft in length and make sure it has a downward slope going into the floor drain.
IMPORTANT
Do not use the hose if you are using the bucket to collect water. When the hose is connected, water will flow through it onto the floor instead of into the bucket.
NOTES
•Do not remove the bucket while the dehumidifier is operating or if it has just stopped operating. This might cause some water to drip from the drain pan.
•The bucket must be in place and securely seated for the dehumidifier to operate.
Sidei ofuniof uniit
4.Replace the bucket in the unit.
NOTE: The bucket must be in place and securely seated for the dehumidifier to operate.
WATER LEVEL
The dehumidifier will turn off automatically when the bucket is full, or when the bucket is removed or not replaced in the proper position.
The bucket must be replaced in the proper position for the dehumidifier to work. The light will be on and the dehumidifier will not run if the bucket is not in the proper position.
5