Operation, Setting, Kitchen Timer, Power Levels

OPERATION

SETTING

THE CLOCK Your microwave clock is a 12-hour system.

When the microwave oven is plugged into an outlet, the oven will display “0:00”;

1)Press “CLOCK/PRE-SET”, LED will display 00:00 and clock indicator will be illuminated. The hour figures will flash; “0” and “:” will illuminate.

2)Press the number keys and enter the correct time. For example, time is 10:12- press “1, 0, 1, 2” in turn.

3)Press “AM/PM” to choose AM or PM in turn by pressing the AM/PM button until your desired choice is displayed.

4)Press “CLOCK/PRE-SET” to finish setting the clock; the clock indicator will go out and “:” will flash as the clock time displays.

5)If the numbers input are not within the range of 1:00-12:59, the setting will be invalid until valid numbers are entered.

NOTE: In the process of clock setting, if the

“STOP/CLEAR” button is pressed or if there is no operation within 1 minute, the oven will revert to the former setting automatically.

KITCHEN TIMER

1)Press “KITCHEN TIMER”; LED will display “00:00”, and the first hour figure will flash.

2)Press the number keys and enter the timer time (the maximum cooking time is 99 minutes and 99 seconds).

3)Press “START/+30SEC.” to confirm the setting (clock indicator will illuminate).

4)When the kitchen timer time is reached, the clock indicator will go out and the microwave will sound 5 times. If the clock is set the LED will show current time.

NOTE: The kitchen timer is different from the 12- hour clock system and is intended only for use when timing.

POWER LEVELS

Ten power levels are available:

Level	10	9	8	7	6	5	4	3	2	1

Power	100%	90%	80%	70%	60%	50%	40%	30%	20%	10%

Display	PL10	PL9	PL8	PL7	PL6	PL5	PL4	PL3	PL2	PL1

NOTE: When a power level between levels 10-8 is chosen, the high level indicator illuminates and it will flash when in operation. When a power level between levels 7-1 is chosen, the low level indicator illuminates and it will flash when in operation.