Danby DMW945SS owner manual Setting The Oven Timer, Setting The Cooking Time & Power Level

Models: DMW945SS

1 20
Download 20 pages 18.99 Kb
Page 11
Image 11
2. SETTING THE OVEN TIMER

C. Notes on setting the clock.

If YOU MAKE A MISTAKE in setting the correct time, start oven by pressing the CLOCK pad twice.

TO RECALL TIME OF DAY WHILE YOU ARE COOKING, press the CLOCK pad. Time of the day will be displayed for 3 seconds before returning to displaying the counting down of the cooking time.

IN CASE OF POWER FAILURE, when the power has been restored, the control will be in a clock set mode. Follow the directions for setting the clock.

BEEPS DURING OVEN SETTING ONE BEEP: Oven accepts the entry. Information has been entered in the correct sequence. TWO BEEPS: Oven does not accept the entry. Check and try again.

2. SETTING THE OVEN TIMER

A.Timer works independently of cooking and can be set anytime for various kitchen tasks. Use oven timer though oven is also timing a microwave

cooking function. Set time as follows:

Touch the TIMER pad. Word prompts ENTER TIMER TIME show on the display. If you are using the TIMER while cooking in the oven:

Cooking time countdown will be temporarily replaced on the display while timer is being set.

Enter the amount of time you wish to set by touching the correct number pads. Digit time is in minutes and seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 sec-seconds). ENTER TIMER remains on the display.

Touch START/STOP pad. Word prompt TIMER starts flashing and timer countdown can be seen on display for 3 seconds before cooking time is returned to display. Word prompt TIMER is displayed alone with additional word prompt indicating current cooking mode.

B. Notes on setting the oven timer.

To STOP OR RESET TIMER when cooking is not taking place, touch RESET pad.

WHEN SETTING TIMER DURING A COOKING OPERATION take care to set timer correctly. Once the timer is set during cooking, setting cannot be changed without resetting the cooking function at the same time. Touching RESET will not allow you to change timer setting while cooking.

When end of time has been reached, one long beep can be heard and timer will leave the display. If oven is not cooking, CLOCK and time of day (if set) will return to the display. If oven is in cooking operation, one long beep can be heard and TIMER will leave display while oven is continuing cooking time countdown.

3.SETTING THE COOKING TIME & POWER LEVEL

A. QUICK & EASY

When cooking at 100% power, simply set cook time by touching number pads (for example, 3 minutes: touch 3-0-0) and START. 100% power is automatically set. For 1-step cooking, you do not have to touch COOK pad before setting time.

B.TO COOK AT LOWER POWER LEVELS

After setting cook time, touch POWER pad then single digit representing the power level desired. Touch START pad. Since oven automatically assumes 100% power, you must switch power level (when desired) after setting cook time.

USE THESE SINGLE DIGITS TO

REPRESNET POWER LEVELS

Digit

% of Power

9

90%

8

80%

7

70%

6

60%

5

50%

4

40%

3

30%

2

20%

1

10%

.

8

Page 11
Image 11
Danby DMW945SS owner manual Setting The Oven Timer, Setting The Cooking Time & Power Level