OPERATING INSTRUCTIONS
FEATURES
1
2 
31) THERMOSTAT DIAL: For controlling the temperature inside the freezer. Turns the motor on
as soon as the temperature rises above the desired level.
2)REFRIGERATED SHELVES:3 full width 4 refrigerated shelves.
3)MAGNETIC GASKET: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.
4)DOOR BINS (4)
5)DRIP TRAY
DOOR
REVERSAL
INSTRUCTIONS
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process.
1)To access the lower hinge assembly, tilt back the freezer cabinet or lay the freezer on its back. (Fig.A)
2)Remove both leveling legs located at the front of the cabinet.
3)Remove the screws holding the lower hinge assembly to the cabinet.
4)Remove the main door assembly from the freezer cabinet (lift door slightly and pull downward).
5)Using a flat head screwdriver, remove the main door top hinge pin.(Fig.B)
6)
7a) Remove the door plug and door bushing located on the top of the main door.
7b) Interchange their positions (eg.door plug right side, door bushing left side).
8)
9)Remove door bushing (bottom door) and install on opposite side.
10)
11)Make sure the door assembly is properly aligned on the cabinet before tightening lower hinge screws.
12)
Fig. A
Fig. B
2
