DLCC configuration can be performed by four methods:
• DL Mobile Configurator™ to set the primary DLCC parameters;
• DL Sm@rtSet™ software configuration program;
• configuration strings sent from the Host via COM port;
• DLCARD.EXE DOS Configuration Program to perform a complete
configuration of DLCC.
Your card is supplied with its own Quick Reference Manual which provides basic
application parameter settings using configuration strings, default values, and
specific technical features. You can see either your card's Quick Reference Manual
or this manual for initial configuration.
To use this manual for initial setup see chapter 2.
If you need to change the default settings for your specific application, see chapter 3
and the Examples in appendix A.
DL Mobile Configurator™
Through this Windows-based utility program it is possible to configure the terminal
and set the primary DLCC parameters from a PC. To send the configuration to the
terminal connect the PC to Rhino™ via RS232. For more details about this
configuration method refer to the DL Mobile Configurator™ manual.
DL Sm@rtSet™
DL Sm@rtSet™ program, available on the Datalogic website, is a Windows-based
utility program providing a quick and user-friendly configuration method.
It allows defining the complete DLCC configuration and sending it directly to the card
via virtual COM port.
Connect to www.datalogic. com/service s/support/ to download the software.
Configuration Strings from Host
This configuration method may be used for initial and complete configuration (see
chapter 2) by sending the desired strings provided in chapter 3 through the COM
port. Batch files containing the desired parameter settings can be prepared to
configure the card quickly and easily.
Reference notes describing the operation of more complex parameters are given in
chapter 4.
xii