DS6300 DEVICENET MODEL
19
SOFTWARE FEATURES ENVIRONMENTAL FEATURES
Interleaved 2/5 Operating
Readable Codes
Code 39 standard Temperature
0° to +40 °C
(+32 to +104 °F)
Codabar
Code 128 Storage Temperature -20° to +70 °C
(-4° to +158 °F)
EAN 128 Humidity 90% non condensing
Code 93 (Standard & Full ASCII) Ambient Light
EAN/UPC (including Add-on 2 and Immunity 3500 lux
Add-on 5) Vibration Resistance 14mm @ 2 to 10Hz
Code Selection Up to 10 codes during one reading IEC 68-2-6 test FC 1.5 mm @13 to 55 Hz
phase 2 g @ 70 to 200 Hz
2 hours on each axis
Headers and Up to 128-byte headers and128- Shock Resistance 30 g; 11 ms
Terminators byte terminators IEC 68-2-27 test EA 3 shocks on each axis
Operating Protection Class
Modes On Line, Automatic, Test
Config. Mode Genius™ utility program
IP64
Param. Storage Non-volatile internal FLASH
PHYSICAL FEATURES
Std Models Oscill. Mirror
Dimensions mm
(inch)
110x113x99
(4.33x4.45x3.9) 113x180x104.5
(4.45x7.08x4.11)
Weight 1.5 kg (3.3 lb) 2.0 kg (4.4 lb)
Accessories:
Name Description Part Number
CAB-6011 Cable to C-BOX100 1 m 93A051221
CAB-6012 Cable to C-BOX100 2 m 93A051222
CAB-6015 Cable to C-BOX100 5 m 93A051223
C-BOX 100 Passive connection box 93ACC1510
INT-30 20 mA C.L. interface board for C-BOX 100 93A151022
GFC-60 90° mirror 93A201100
GFC-600 90° mirror close distance 93A201102
GFX-60 X-pattern mirror 93ACC1730
PWR-120 Power unit 110/230 V AC - 24 V DC 93ACC1530
BTK-6000 Terminator kit (5 pcs) 93ACC1710
PG6002 Single unit power supply – US 93ACC1718
PG6001 Single unit power supply – UK 93ACC1719
PG6000 Single unit power supply – EU 93ACC1720
FBK-6000 Fast bracket kit (2 pcs) 93ACC1721
US-60 Mounting bracket kit (5 pcs) for multisided stations 93ACC1729
PH-1 Photocell kit - PNP 93ACC1791
MEP-543 Photocell kit – NPN 93ACC1728
OEK-2 Optical encoder (10 m cable + spring) 93ACC1770
OEK-1 Optical encoder kit + 10 m cable 93ACC1600
Electrical Connections:
The DS6300 DeviceNet reader provides a 26-pin male D-sub connector for connection to power supply and
input/output signals.
A DeviceNet connector is used for connection to the remote Host, while a local Lonworks 9-pin female connector
connects the DeviceNet master to the first slave reader of the system.
NOTE
When using DeviceNet, the Main serial interface is disabled and must not be physically
connected.