Datalogic Scanning DX6400 2.3 ELECTRICAL CONNECTIONS

INSTALLATION 2

The FBK-6000 is a fast bracket kit allowing a quick and easy mounting of the scanner on the

ST-237 bracket.

First, it is necessary to fix the FBK-6000 to the DX6400 scanner by means of the mounting

screws:

Figure 7 – Mounting the FBK-6000 on the Scanner

Then, attach the assembly to the mounting bracket by slipping the hook into the bracket hole.

Finally, fix it by means of the 2 fixing screws:

Figure 8 – Mounting the Assembly on the Bracket

2.3 ELECTRICAL CONNECTIONS

All the connectors available for each scanner model are the following:

Scanner Model Connectors

Master/Slave 25-pin male serial interface and I/O connector

9-pin male Lonworks connector*

9-pin female Lonworks connector

Ethernet 26-pin male serial interface and I/O connector

9-pin female Lonworks connector

RJ45 modular connector

CAUTION

* Do not connect an RS232 port to the 9-pin Lonworks Connector. This may

damage your Laptop PC.

Contents

Main Page CONTENTS Page REFERENCES REFERENCE DOCUMENTATION SERVICES AND SUPPORT PATENTS COMPLIANCE ELECTRICAL SAFETY LASER SAFETY Standard Regulations N2468 POWER SUPPLY CE COMPLIANCE WEEE COMPLIANCE GENERAL VIEW DX6400 3 Identification Label Warning and Device Class Label Programming Keypad Phase On LED TX Data LED Power On LED LCD Display 5 1 2 3 GUIDE TO INSTALLATION POINT-TO-POINT INSTALLATION MASTER/SLAVE LONWORKS INSTALLATION Page 1 INTRODUCTION 1.1 PRODUCT DESCRIPTION 1.2 APPLICATIONS 1.3 MODEL DESCRIPTION DX6400 - 100 - 0YY 1.4 INDICATORS 1.5 ACCESSORIES 2 INSTALLATION 2.1 PACKAGE CONTENTS 2.2 MECHANICAL MOUNTING 2.2.1 Mounting the Scanner INSTALLATION 2 Figure 3 - DX6400 Overall Dimensions Figure 4 ST-237 Mounting Bracket Overall Dimensions 2.2.2 Mounting the Scanner with Accessories 2.3 ELECTRICAL CONNECTIONS Page 2.3.1 Main/Aux. Serial Interface and I/O Connector Main Interface RS232 Interface RS485 Full-Duplex Interface RS485 Half-Duplex Interface Auxiliary Interface Inputs Page Outputs Page Page 2.3.2 Lonworks Input/Output Connector Network Termination Lonworks Interface Page 2.3.3 Ethernet Connector Ethernet Interface 2.3.4 Power Supply 2.4 USER INTERFACE 2.5 TYPICAL LAYOUTS 2.5.1 Point-to-Point Page 2.5.2 Pass Through 2.5.3 RS232 Master/Slave INSTALLATION 2 A Network A 2.5.4 Multiplexer 2.5.5 Local Lonworks Network Small Synchronized Network Page Large Synchronized Network Multidata Network 2.5.6 Fieldbus Network 2.6 DX6400 FLASH DYNAMIC FOCUS 2.6.1 Fixed Mode 2.6.2 Continuous Mode 2.6.3 Triggered Mode 2.6.4 D-FLASH Mode 2.7 KEYPAD AND DISPLAY 2.7.1 Internal Net 2.7.2 Test Mode 3 SOFTWARE CONFIGURATION 3.1 GENIUS INSTALLATION 3.2 GUIDE TO RAPID CONFIGURATION 3.2.1 Wizard for Quick Reader Setup Test Operating Mode On Line Operating Mode Automatic Operating Mode 3.2.2 Genius Network Setup Through Master Page Net-Autoset Express Network Setup Network Wizard Page 3.2.3 Alternative Slave Address Assignment 3.3 ADVANCED GENIUS CONFIGURATION 3.4 PARAMETER DEFAULT VALUES Page Page Page 4 READING FEATURES 4.1 ADVANCED CODE RECONSTRUCTION (ACR 4) 4.1.1 Tilt Angle for Advanced Code Reconstruction 4.2 PACKTRACK Page 4.2.1 PackTrack Calibration for DX6400 Scanner Direction Page 4.2.2 Overwriting PackTrack Calibration for DX6400 4.3 PERFORMANCE 4.4 READING CONDITIONS 4.5 READING DIAGRAMS Page 5 MAINTENANCE 5.1 CLEANING 5.2 AUTOMATIC SCANNER REPLACEMENT 5.2.1 ASR Network Configuration 5.2.2 Scanner Replacement Procedure 6 TROUBLESHOOTING Page Page 7 TECHNICAL FEATURES Page GLOSSARY Page Page INDEX Page