6
Precautions oHandling
Proper attention should be given when handling the unit.
Operational Handling
Try to avoid moving the unit while it is being operated; normal body motion
is acceptable. Avoid moving the unit with quick, hard disruptions. Try to
avoid using the unit on a surface with noticeable vibration. Do not drop or
bang the unit while operating; damage could occur.
Non-Operational Handling
Avoid dropping the unit onto hard surfaces; damage could occur.
oVentilation
The unit should be operated with adequate space around it so that proper
heat ventilation is accomplished. Do not operate the unit inside of an
airtight, non-ventilated container. Do not block airflow from the fan at the
rear panel. Always ensure there is prop er ventilation around the unit. Allow
at least 1-1/8 inch / 3 cm of clearance space around the unit with at least 2
inches / 5 cm of clearance from the rear panel near t he fan.
oHeat
Do not use the unit near sources of heat that exceed 130° F / 55° C. It is
also CRITICALLY IMPORTANT not to use the unit in temperatures lower than
40° F / 5° C.
oMoisture
Do not use or store the unit in high humidity environments. Avoid using
near an area where water could be sprayed upon the unit.
oAltitude
The low concentration of oxygen in the air at high altitudes may cause the
heads to crash. Do not use the unit in altitudes at greater than 9,850 ft. /
3,000 m above sea level.