9. AUX Video Input (D-Sub 9-Pin):
An additional video input terminal with RGB and Sync input interface. Connect the Pin 7 to Ground (Short the Pin 7 & 8) to activate this interface and turn on the 12VDC power output on Pin 1 & 6.
PIN 1: 12VDC 300mA output
PIN 2: Video “R”Input
PIN 3: Video “G”Input
PIN 4: Video “CV_Sync”Input
PIN 5: Video “B”Input
PIN 6: 12VDC 300mA output
PIN 7: SDI Switch (Connect to Ground to enable RGB Input of Pin
PIN 8: Ground
PIN 9: Ground
10.DIP Switch setting for DV Input mode select
Please refer to the setting below for proper operation.
S1. PAL or NTSC | |
S2. NTSC setup level 7.5 IRE / 0 IRE (ON: 0 IRE, OFF: 7.5 IRE). (See Note 2 below) | |
S3. Locked Audio (OFF: Locked Audio, ON: Unlocked Audio, factory default) | |
S4 & S5 setting for different PC Operation System | |
S5 | ON | S4 | ON | MAC OS (See Note 3 below) | |
OFF | Windows 2000 and Windows 98 | ||||
|
|
| |||
S5 | OFF | S4 | ON | Windows XP and Windows ME | |
OFF | DV Camera mode | ||||
|
|
|
S6. Factory setting (OFF), please do not change.
*. Note 1: Reboot
*. Note 2: NTSC 0 IRE is most often used in Japan NTSC 7.5 IRE is used elsewhere
*. PAL Video is always at 0 IRE mode
*. Note 3: To work with a DV source from MAC with Final Cut Pro: 1). Select "Preferences" from Final Cut Pro menu
2). Select "General" page
3). Uncheck "Abort capture on dropped frame"
4). Uncheck "Abort capture on time code break" for Final cut pro
5). Click OK button
6
