Daxten Tx1 manual Introduction, Features, Operation, Compatibility

INTRODUCTION

Thank you for choosing the Galaxy ™ system, designed for Distributing and daisy chaing high-resolution video signals over long distances via CAT 5 cables. By choosing Galaxy, you have assured that your installation is equipped for the ever- increasing demands made in a modern computer-based information environment.

The Galaxy system allows the info-computer to transmit this monitor image to a number of receiver monitors in large environments such as subway stations, bus terminals, airports, restaurants, malls, banks etc.

The Galaxy Tx1 is a base unit with one VGA output and one UTP output. The Galaxy Tx4 is a base unit with one VGA output and four UTP outputs. The Tx1 and Tx4 can be fitted with different option cards:

∙UTP-in Card for up to 125m distance

∙UTP-in Card for up to 300m distance

∙A skew compensator board

∙Sound board on request and requirements

Features

∙Up to 300 meters in one line without repeater

∙Up to 1000 meters with 10 Galaxy Repeaters in 800 x 600 @ 75 HZ

∙Compatible with the Galaxy Rx60 Receiver for building in and the external Rx60, Rx125 or Rx300 version

∙Sound or remote operation of monitors ON/OFF on request

Operation

The Galaxy is simple to operate, but need planning before installation, to obtain the best picture quality.

Compatibility

This product has been tested with a wide variety of hardware. However, it is impossible to guarantee correct operation with every monitor currently on the market.

The Galaxy is compatible with the following equipment:

∙Monitor: VGA, SVGA, XGA, SXGA, UXGA

∙Computers: all computers using a HD-15 VGA output and standard VGA signals RGB and two sync signals H/V

3