Dayton Operating Instructions and Parts Manual

Model 3VG78

General Safety Information (Continued)

Carbon monoxide poisoning may lead

to death! Some people are more affected by carbon monoxide than others. Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, and/or nausea. If you have these signs, the heater may not be operating properly, or the areas may not be sufficiently ventilated. Get fresh air at once! Have heater serviced.

Natural Gas: Natural gas has a distinc- tive odor. This odor helps you detect a natural gas leak. However, the odor may fade. Natural gas may be present even though no odor exists.

• Install and use heater with care.

Follow all local ordinances and codes. In the absence of local ordinances and codes, refer to the National Fuel Gas Code handbook NFPA54/ANSI Z223.1 and the Natural Gas Installa- tion Code, CAN/CGA B149.1. This instructs on the safe storage and handling of flammable gases.

Use only the electrical voltage and frequency specified on model plate. The electrical connections and grounding of the heater shall follow the National Electric Code, ANSI/ NFPA 70 or the Canadian Electrical Code, Part 1.

Electrical grounding instructions — This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle or extension cord.

Use only natural gas. Do not attempt to operate on LP gas.

Provide adequate ventilation. Before using heater, provide at least a three-square-foot opening of fresh, outside air for each 100,000 Btu/Hr of rating. This heater produces carbon monoxide, which is listed by the State of California as a reproductive toxin under Proposition 65.

For indoor use only. Do not use heater outdoors.

Do not use heater in occupied dwellings or in living or sleeping quarters.

Do not use heater in a basement or below ground level. Propane gas is heavier than air. If a leak occurs, propane gas will sink to the lowest possible level and may accumulate to explosive concentrations.

Keep appliance area clear and free from combustible materials, gaso- line, paint thinner, and other flam- mable vapors and liquids. Dust is combustible. Do not use heater in areas with high dust content.

Minimum heater clearances from combustibles:

Outlet: 8 Ft.

Sides: 2 Ft.

Top: 6 Ft.

Rear: 2 Ft.

Check heater for damage before each use. Do not use a damaged heater.

Check hose (if used) before each use of heater. If highly worn or cut, replace with hose specified by manufacturer before using heater.

Locate heater on stable and level surface if heater is hot or operating.

Never block air inlet (rear) or air outlet (front) of heater.

Keep heater away from strong drafts, wind, water spray, rain, or dripping water.

Never operate heater while unat- tended.

Keep heater away from strong drafts, wind, water spray, rain, or dripping water.

Keep children and animals away from heater.

This heater is equipped with a thermostat. Heater may start at anytime.

Never move, handle, or service a hot, or operating heater. Severe burns may result. You must wait 15 minutes after turning heater off.

To prevent injury, wear gloves when handling heater.

Never attach duct work to heater.

Do not alter heater. Keep heater in its original state.

Do not use heater if altered.

Turn off natural gas supply to heater and unplug when not in use.

Use only original replacement parts. This heater must use design-specific parts. Do not substitute or use generic parts. Improper replacement parts could cause serious or fatal injuries.

®

3

Version B - For Reduction

G016.J

Page 3
Image 3
Dayton instruction manual Model 3VG78

3VG78 specifications

The Dayton 3VG78 is a versatile and advanced electric motor that has gained recognition in various industries for its exceptional performance and reliability. Designed with cutting-edge technology, the 3VG78 offers an ideal solution for those seeking efficient and powerful motor capabilities.

One of the main features of the Dayton 3VG78 is its robust construction. Built with high-quality materials, this motor ensures durability and longevity, making it suitable for demanding applications. The motor is designed to operate under various environmental conditions, which enhances its adaptability and usability in different settings.

The 3VG78 boasts a premium efficiency rating, which translates to lower energy consumption. This not only reduces operational costs but also makes it an eco-friendly choice for businesses aiming to decrease their carbon footprint. The incorporation of premium efficiency motors aligns with global sustainability goals, prioritizing energy-saving technologies.

Another key characteristic of the Dayton 3VG78 is its compact design, which allows for easy installation in a variety of settings. Whether it’s for HVAC systems, conveyors, or other industrial applications, the motor fits seamlessly into existing setups without requiring extensive modifications. This flexibility is a significant advantage for industries seeking to upgrade their equipment with minimal disruption.

In terms of performance, the Dayton 3VG78 operates at a high RPM, delivering excellent torque output. This capability ensures that machinery functions effectively, enhancing overall productivity. Additionally, the motor can handle both high load conditions and variable speed applications, making it a suitable choice for diverse operational requirements.

The Dayton 3VG78 is also equipped with advanced thermal protection features. This ensures that the motor remains safe during operation, preventing overheating and potential damage. Such technology protects the investment and prolongs the lifecycle of the motor.

Overall, the Dayton 3VG78 combines robust construction, energy efficiency, compact design, and advanced performance technologies. These characteristics make it an ideal choice for a variety of applications within the industrial sector. By choosing the Dayton 3VG78, businesses can enhance their operational efficiency while embracing sustainable practices. As industries evolve and demand higher reliability from equipment, electric motors like the 3VG78 set a benchmark in performance and innovation.