Dayton Operating Instructions and Parts Manual

Model 3VG79

Assembly

This model is furnished with wheels and handles. Wheels, handles, and the mounting hardware are found in the shipping carton.

TOOLS NEEDED

Medium Phillips Screwdriver

3/8" Open or Adjustable Wrench

Hammer

1.Slide axle through wheel support frame. Install wheels on axle.

IMPORTANT: When installing wheels, point extended hub of wheels toward wheel support frame (See Figure 4).

4.Place handles on top of fuel tank flange. Insert screws through handles, fuel tank flange, and wheel support frame.

Attach nut finger tight after each screw is inserted.

5.After all screws are inserted, tighten nuts firmly.

Ventilation

Follow the mini- mum fresh, outside

air ventilation requirements. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

TO START HEATER

1.Follow all ventilation and safety information.

2.Fill fuel tank with kerosene or No. 1 fuel oil.

3.Attach fuel cap.

4.Plug power cord of heater into three- prong, grounded extension cord. Exten- sion cord must be at least six feet long.

EXTENSION CORD WIRE SIZE

REQUIREMENTS

• 6 to 10 feet long, use 18 AWG

rated cord

• 11 to 100 feet long, use 16 AWG

Hot Air Outlet

Front

Handle Rear

Handle

Screw

FRESH AIR OPENING REQUIREMENTS

 

Square Feet

Heater Size

Opening

200,000 Btu/Hr

6.0

Provide at least a three-square-foot

rated cord

• 101 to 200 feet long, use 14 AWG

rated cord

5. Plug extension cord into standard 120

volt/60 hertz, three-hole, grounded outlet.

Fuel

Air

Tank

Inlet

Flange

Wheel

Support

Frame

Nut

Extended

Axle Hub

Cap Nut

Wheel

Figure 4 - Wheel and Handle Assembly

2.Place cap nuts on axle ends. Gently tap with hammer to secure.

3.Place heater on wheel support frame. Make sure air inlet end (rear) of heater is over wheels. Line up holes on fuel tank flange with holes on wheel support frame.

opening of fresh, outside air for each 100,000 Btu/Hr rating. Provide extra fresh air if more heaters are being used.

Example: A 200,000 Btu/Hr heater requires one of the following:

a two-car garage door (16 feet wide opening) raised five inches

a single-car garage door (9 feet wide opening) raised eight inches

two windows (30 inches wide opening) raised fifteen inches

Operation

Review and understand the

warnings in the Safety Information Section. They are needed to safely operate this heater. Follow all local codes when using this heater.

Heater will start when extension cord is

plugged into outlet. If not, push in flame-

out control reset button (See Figure 5).

Flame-out Control

Reset Button

Figure 5 - Flame-out Control Reset Button

TO STOP HEATER

1. Unplug extension cord from outlet.

TO RESTART HEATER

1.Wait two minutes after stopping heater.

2.Repeat steps under To Start Heater.

®

5

Version B - For Reduction

G016.J

Page 5
Image 5
Dayton 3VG79 operating instructions Assembly, Ventilation, Operation

3VG79 specifications

The Dayton 3VG79 is an advanced subwoofer that excels in delivering exceptional audio quality for home theater enthusiasts and audiophiles alike. Renowned for its impressive performance and robust build, this model has carved a niche for itself in the competitive audio market.

One of the standout features of the Dayton 3VG79 is its powerful driver. Equipped with an 8-inch polypropylene cone, the subwoofer produces deep, resonant bass that enhances movie watching and music listening experiences. The cone is designed to minimize distortion, ensuring that the bass remains clear and impactful, even at high volumes. The rubber surround provides durability and flexibility, contributing to the longevity and performance of the subwoofer.

The Dayton 3VG79 is powered by a highly efficient 200-watt amplifier, which allows for optimum performance without compromising on audio quality. This built-in amplifier is specifically tuned to match the subwoofer's driver, enabling it to deliver robust sound with clarity across all frequencies. It boasts a frequency response range that extends down to 25 Hz, making it ideal for reproducing the lowest notes found in movie soundtracks and music.

Another notable characteristic of the Dayton 3VG79 is its versatile connectivity options. With both line-level and speaker-level inputs, it can easily integrate into various audio setups. This flexibility makes it suitable for both home theater systems and stereo music playback, allowing users to experience immersive sound in any context.

The design of the Dayton 3VG79 is sleek and modern, featuring a black wood veneer finish that complements any home decor. Its compact form factor makes it easy to position in a room without taking up excessive space, while still providing powerful sound output. The subwoofer also comes with adjustable controls for volume, phase, and low-pass crossover, which allows users to customize their audio experience to suit personal preferences and room acoustics.

In summary, the Dayton 3VG79 subwoofer combines advanced technologies, powerful performance, and versatile features, making it a top choice for those seeking to elevate their audio experience. Its robust construction, exceptional sound quality, and stylish design ensure that it stands out in today's audio landscape. Whether for home theater setups or music playback, the Dayton 3VG79 delivers bass that truly enriches the listening experience.