dbx Pro 1074 manual Quad Noise Gate, Input Power Supply, Physical, Output, System Performance

1074 Quad Noise Gate

Input		Power Supply
Connectors:	XLR (Pin 2 and tip hot)	Operating Voltage:	100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Type:	Electronically balanced/unbalanced, RF filtered	Power Consumption:	30 Watts
Impedance:	Balanced > 50 kOhm, unbalanced >25 kOhm	Fuse:	100-120 VAC:300 mA Slow Blow
Max Input Level:	> +22 dBu balanced or unbalanced		200-240 VAC: 160 mA Type T
CMRR:	40dB: Typically >55 dB at 1 kHz	Mains Connection:	IEC receptacle
Key Input:	Electronically balanced/unbalanced, RF filtered Balanced 50 kOhm, unbalanced >25
	kOhm	Physical
		Dimensions:	1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Output		Weight:	6.9 lbs.
Connectors:	XLR (Pin 2 hot)	Shipping Weight: 9.3 lbs.
Type:	Servo-balanced/unbalanced, RF filtered
Impedance:	Balanced 60 Ohm, unbalanced 30 Ohm
Max Output Level:	> +22 dBm balanced, > +20 dBm unbalanced
System Performance
Bandwidth:	20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response:	0.35 Hz to 200 kHz, +0/-3 dB
Noise:	< -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:	> 115 dB, unweighted
THD+Noise:	0.008% typical at +4 dBu, 1 kHz unity gain
	0.08% typical at +20 dBu, 1 kHz, unity gain
	< 0.1% any amount of compression up to 40 dB, 1 kHz
Interchannel Crosstalk:	< -80 dB 20 Hz to 20 kHz
Stereo Coupling:	True RMS Power Summing

dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.

FOR MORE INFORMATION CONTACT: dbx Professional Products 8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801) 568-7660 Fax (801) 568-7662 customer@dbxpro.com http://www.dbxpro.com

A Harman International Company