iEQ ™ 15
Dual
Inputs |
| Indicators |
|
Connectors: | 1/4” TRS, female XLR (pin 2 hot), and Euroblock | Output Level: | |
Type: | Electronically balanced/unbalanced, RF filtered | Gain Reduction: | |
Impedance: | Balanced 40kΩ, unbalanced 20kΩ | Type V™ NR: | 1 LED: yellow, green or red |
Max Input Level: | +22dBu balanced or unbalanced | EQ Bypass: | 1 LED: red |
CMRR: | >40dB, typically >55dB at 1kHz | Clip: | 1 LED: red |
|
| Low Cut: | 1 LED: red |
Outputs |
| 1 LED: red | |
Connectors: | 1/4” TRS, male XLR (pin 2 hot), and Euroblock |
|
|
Type: | Balanced/unbalanced, RF filtered | Power Supply |
|
Impedance: | Balanced 120Ω, unbalanced 60Ω | Operating Voltage: | 120VAC 60Hz, |
Max Output Level: | +20dBu balanced/unbalanced into 2kΩor greater | Power Consumption: | 17 Watts |
|
| Mains Connection: | IEC receptacle |
System Performance |
|
|
|
Frequency Response: | 20Hz to 20kHz, | Physical |
|
Dynamic Range: | >113dB, “A” weighted | Dimensions: | 3.5”HX19”WX7.9”D(8.9cmx48.3cmx20.1cm) |
THD+Noise: | 0.003% typical at +4dBu, 1kHz | Weight: | 7.5 lbs. |
Interchannel Crosstalk: | Shipping Weight: | 8.5 lbs. | |
Noise Reduction: | Up to 10dB of dynamic broadband noise reduction |
|
|
Digital Resolution: | 24 bits |
|
|
Sample Frequency: | 48kHz |
|
|
Latency: | 2msec |
|
|
Function Switches |
|
|
|
AFS™: | Activates dbx AFS™ Advanced Feedback Suppression |
|
|
TYPE V™ NR: | Activates dbx Type V™ Noise Reduction |
|
|
EQ Bypass: | Bypasses the graphic equalizer section in the signal path |
|
|
Low Cut: | Activates the 40Hz 18dB/octave Bessel |
|
|
Range: | Selects either +/- 6dB or +/- 15dB slider boost/cut range |
|
|
|
|
|
|
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMATION CONTACT: dbx Professional Products 8760 S. Sandy Pkwy. Sandy, Utah 84070 Phone (801)