Hook UP, Center Channel, DCM16C | DCM Speakers DCM16S, DCM26

CENTER CHANNEL

DCM16C

When using the DCM16C as a center channel speaker in a home theater application the following guidelines should be used for optimum performance.

Locate the speaker as close to the center of your TV or monitor as possible (Figure 1). This will anchor the central image of your home theater to the location of the images seen on the screen.

Place the center channel at an equal distance to the listening position as the main speakers are. Also, place the height of the center channel’s tweeter as close to the same height as the main speakers’ tweeters (Figure 3). This will prevent image blurring when sounds are panned from the one side of the room to the other.

HOOK UP

Use 16 gauge or heavier speaker wire for connecting to your amplifier or receiver. Cut wire lengths leaving an extra 12” to 24” at each end to allow for moving the speaker or receiver.

Using a wire cutter or a sharp knife, strip 1/2” of insulation off each end of the wire to expose the conductor. Twist wire ends to prevent from fraying. Connect the conductors to the binding posts on the bottom or back of the speaker by unscrewing the post enough to expose the hole in the terminal post. Slip the exposed conductor in the hole and tighten the post. Repeat this step for connecting to your amplifier or receiver. Refer to the owner’s manual supplied with your electronics to assist with proper hook up.

Note: To ensure proper performance, make sure that the wire from the red (+) terminal on the speaker is connected to the red (+) terminal on your amplifier or receiver. Likewise, make sure the wire from the black (-) terminal on the speaker is connected to the black (-) terminal on the amplifier or receiver. (Figure 4)

	BLACK RED
BLACK RED	BLACK RED

- +

Figure 3 Proper Placement of Center Channel Speaker

BLACK RED

FIGURE 4 Connecting Speakers to Amplifier or Receiver

Once your speakers are hooked up, turn on your electronics and test to make sure they are functioning properly. If your speakers sound “thin” with little bass and have a poor center image, one of the speaker wires is probably hooked up backwards. Double check all connections for proper polarity.

DCM26, DCM16, DCM16C, DCM16S specifications

DCM Speakers have long been known for their commitment to quality sound and innovative technology. Among their notable offerings are the DCM26, DCM16C, DCM16S, and DCM16 models, each designed to deliver exceptional audio performance in various environments.

The DCM26 is a floor-standing speaker that epitomizes DCM’s dedication to providing rich, full-bodied sound. It features a high-efficiency design that allows it to produce impressive bass response without compromising clarity. The speaker incorporates a 6.5-inch polypropylene woofer, paired with a high-performance 1-inch silk dome tweeter. This combination ensures that the DCM26 can handle a wide frequency range, delivering both deep lows and sparkling highs. Additionally, its cabinet construction minimizes vibrations and enhances sound quality, making it an excellent choice for music enthusiasts and home theater setups alike.

Next in line is the DCM16C, a center channel speaker designed for optimal dialogue clarity in home theater systems. It employs dual 5.25-inch woofers and a 1-inch tweeter, ensuring that voices are reproduced accurately and clearly. The DCM16C’s design allows it to be placed seamlessly with any existing DCM speaker setup, providing a cohesive audio experience. Its angled design helps to project sound towards the listening area, enhancing the surround sound experience and making it an ideal choice for movie lovers.

For those seeking a compact solution, the DCM16S serves as a versatile bookshelf speaker that can easily fit into any room. With its 5.25-inch woofer and 1-inch tweeter, the DCM16S delivers impressive performance despite its small footprint. It excels in reproducing detailed audio across various genres, making it suitable for both music listening and home theater applications. Its sleek design ensures that it doesn’t just sound good but looks good too, blending effortlessly with modern décor.

Finally, the DCM16 model rounds out the lineup, offering a well-balanced sound profile that caters to a diverse range of audio preferences. With similar components to the DCM16S, the DCM16 features an optimized enclosure that enhances bass response and overall sound clarity. Its design promotes versatility in installation, whether used in a stereo configuration or as part of a more extensive home theater setup.

Overall, DCM Speakers’ DCM26, DCM16C, DCM16S, and DCM16 models exemplify a blend of quality craftsmanship, innovative technology, and aesthetic appeal, making them excellent additions to any audio setup.

DCM Speakers DCM16S, DCM26 owner manual Hook UP, Center Channel, DCM16C

Models: DCM26 DCM16 DCM16C DCM16S