SIDE BURNER BUILT-IN MODEL INSTALLATION
6
INSTALLATION OF SIDE BURNER BUILT-IN:
All BGB131-BI and BGB132-BI models can be
installed in combustible enclosure with zero
clearance from the back,side and bottom.
A minimum of 6” from the back and sides must be
maintained from the Professional Side Burner above
the cooking surface to combustible construction
(see Fig. 02).
When determining a suitable location, take into
account concerns such as exposure to wind,proxim-
ity to traffic paths,and keeping any gas supply lines
as short as possible. Locate the Side Burner only in a
well-ventilated area. Never locate the Side Burner in
a garage, breezeway,shed, or other such enclosed
areas.
It is recommended that ventilation holes are provided in the enclosure in the event of a gas leak. The
counter and supporting ledges or deck must be level and flat.
IMPORTANT:
Gas fittings,regulator, and installer shut-off valves must be easily accessible.
FIG.02