DCS DD24DUT7 After the wash, Preference options, Dos and don’ts of loading, For more info, 1 888

After the wash

The dishwasher will beep six times to indicate the end of the wash program.

You may notice the following noises at the end of the wash. These are all part of normal operation:

In double models, both drawers may be draining simultaneously.

The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy.

For best drying results, we recommend unloading the dishes once they have cooled.

Preference options

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.

Option	Rinse aid	Water softener*	Open drawer auto	Beeps at end of	Closed drawer autolock
			power-on	wash
	Regulates the amount	Refer to the	Your dishwasher is	Your dishwasher is	When this setting is on,
	of rinse aid dispensed.	‘Water softener’	factory-set to	factory-set to beep	the drawer will
	Reduce this setting if	section of the	automatically power	six times at the end	automatically lock 30
What does	there is excess foam	‘User guide’ for	on for 30 seconds	of a wash. You can	seconds after it’s closed.
	after a wash. Increase	details.	whenever you open	turn this setting off.	It can then be unlocked
it do?
	this setting if dishes are		the drawer.		by pressing	(unless
	wet or streaky after a		You can turn this		Keylock or Childlock is also
	wash.		setting off.		activated). Useful in boats
					or motor homes.

Dos and don’ts of loading

Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury.

Protruding items will stop the internal lid of the drawer from sealing properly, which could result in a service call.

How to change the setting of an option

1CHECK & OPEN

Check that there is no wash underway, press , then open the drawer.

2ENTER MENU & SCROLL TO OPTION

To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu.

If you want to change the Rinse aid setting, go to step 3 now.

If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press . To know which option you’re in, watch the lights above and (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

A neatly arranged load with evenly	Overcrowding reduces wash
spaced dishes helps wash performance.	performance.

Ensure there is enough space between	If plates and cutlery are nesting,
plates. Mix spoons, knives and forks	they are less likely to be cleaned

Option	Rinse aid		Water softener*		Open drawer auto		Beeps at end of wash		Closed drawer
					power-on				autolock
Which option	red	unlit	blue	unlit	purple	red	blue	red	red	red
am I in?
Possible settings		1 to 5	0 to 5		On or Off		On or Off		On or Off
Example						On
		4 indicators lit = setting is 4				Off

3CHANGE SETTING

Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,

you need to press 3 times.

4SAVE SETTING & QUIT MENU

Press . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

within the cutlery basket to prevent	well.
them from nesting.

Ensure that water reaches all items on	Dishware is blocking water from
the adjustable racks.	reaching items on the adjustable
	racks.

For more info

For detailed information on the features of your dishwasher

For warranty information

If you…

have any questions or comments

need a DCS by Fisher & Paykel authorized technician to service your product

need replacement parts or accessories want to register your product

see your ‘User guide’

see your ‘Service and warranty’ booklet

see your ‘Service and warranty’ booklet or contact us

toll-free, 24/7 1 888 936 7872 www.dcsappliances.com

590231B 09.12