DCS none FRONT PANEL

dCS Scarlatti Clock User Manual Software Issue 1.0x

June 2008

Filename: Scarlatti Clock Manual v1_0x.doc Page 9 English version

FRONT PANEL

Scarlatti

dCS

FREQUENCY MENU

DITHER

DISPLAYPOWER

Figure 2 – Front panel

POWER Button

To switch on, ensure the rear panel switch is set to I and press the POWER button (A) on the front

panel once. Note that the unit cannot be turned on from the remote control.

To set the unit to sleep mode, press the POWER button once. The main display will turn off, the clock

outputs will mute and the LED over the button will light. Press again to return to normal operation.

To switch off, hold down the POWER button for about 5 seconds until Power Down appears on the

display, then release it.

When the menu is open, press the POWER button to close the menu.

DISPLAY Button

Press the DISPLAY button (B) to turn the main display off and on. When the display is off, the LED

over the button will light to warn you that the unit is running.

When the menu is open, the DISPLAY button changes to the ← button, used to page backwards

through the menu.

DITHER Button

Press the DITHER button (C) to turn the Dither feature on and off. This dithers the clock edges in a

controlled way to exercise the phase-locked–loops in the source and DAC. Try it and decide for

yourself whether you prefer Dither on or off.

When the menu is open, the DITHER button changes to the → button, used to page forwards through

the menu.