Definitive Technology 2500 Installing the Logo, Installing the Feet/Angling Device, Service

Models: 2500

1 14
Download 14 pages 50.58 Kb
Page 13
Image 13
Installing the Logo

Installing the Logo

Because the C/L/R 2500 can be used either vertically or horizontally, the logo is supplied separately. Holes are provided for installation when the speak- er is used horizontally. These are located under the grill cloth at the center of the lower edge at the front of the speaker approximately 11/16'' up from the edge and 1 1/2'' apart. Locate the logo over these two holes and gently tap it in through the grill cloth.

Installing the Feet/Angling Device

The C/L/R 2500 is supplied with brass inserts designed to go into the bottom of the speaker to hold adjustable feet which hold the speaker above the surface it is placed on as well as give you the option of angling the speaker up or down to point directly at the listeners. Install three of these inserts in the bottom of the speakers. There are predrilled holes on the bottom of the speaker under the grill cloth (when the speaker is positioned horizontally). Simply locate the holes.

Two holes are 2'' back from the front and 15 1/16'' apart. You also have a choice for the rear hole depending on the depth of the surface you will place the speak- er on. They are located along the center line going from the front and the back of the speaker on the bottom. Then feel for them and select one of these holes. Gently tap the inserts in through the grill cloth and screw the feet in.

Technical Assistance

It is our pleasure to offer assistance if you have any questions regarding your C/L/R 2500s or their set-up. Please contact your nearest Definitive Technology dealer or contact us directly at 410-363-7148 or www.defini- tivetech.com.

Service

Service and warranty work on your Definitive loudspeakers will normally be performed by your local Definitive Technology dealer. If, however, you wish to return the speaker to us, please contact us first, describing the problem and

requesting authorization as well as the locations of the nearest factory service center. Please note that the address given in this booklet is the address of our offices only. Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization.

Definitive Technology Offices

11433 Cronridge Drive

Owings Mills, Maryland 21117

Phone: 410-363-7148

Visit us at www.definitivetech.com

13

Page 13
Image 13
Definitive Technology 2500 Installing the Logo, Installing the Feet/Angling Device, Technical Assistance, Service