Rinse aid

Only use rinse aid specifically intended for dishwashers

C

E

Visual indicator

Dark:sufficient rinse aid

Light: add rinse aid

Rinse aid prevents water and calcium streaking on dishes and speeds up the drying process. It is advisable therefore to always ensure that there is an adequate amount of rinse aid in the dispenser.

You can adjust the amount of rinse aid released during a programme by turning the dispenser regulator () The regulator level may be set between 1 (minimum) and 6 (maximum).

According to the cleanliness and drying results obtained, adjust the dose of rinse aid by means of the six position regulator.

If lime marks appear select a lower setting. If water marks appear select a higher one.

The machine is pre-set at the factory to level 3.

How to fill the rinse aid dispenser.

Open the rinse aid container lid by pressing on the tab (see sketch 1)

Fill the container with rinse aid to the "MAX" mark.. Close the lid () A clicking sound will indicate that the lid is properly closed.

Remember to close the lid after every re-fill. Wipe up any spilt rinse aid.

A sight glass allows inspection of the rinse aid level in the dispenser. If the rinse aid appears to be diluted or is lighter in colour, it needs to be replenished.

Loading

The dishwasher has a twelve place setting capacity

Before loading any dishes remove large scraps of food thereby preventing the filters from blocking. Very dirty pots or frying pans should be soaked in water before they are placed in the dishwasher. This allows dirt to be removed more easily.

Load plates with the top facing forwards and cups and pans with the opening facing down.

8