Page 5
Installation—continued INLET HOSES
• Connect the respective inlet hoses to the hot and cold water taps and to the machine’s inlet
fittings. The hot water inlet is on the left and the cold water inlet on th e right.
CONNECTING THE WATER INLET HOSES
• Connect the inlet hoses to threaded hot and cold water taps and
to the machine’s inlet fittings. Take care not to confuse the hot
and cold water inlets. The hot water inlet is coloured pink and
the cold water inlet is coloured blue.
• If only one water tap is available, connect the inlet hose to the
blue, cold water coupling.
• Open the taps and check for leaks. Re-tighten couplings if nec-
essary.
• The washing machine is designed to operate on a 230 Volt, 50 Hz, 15 Amp, AC power
supply.
• The machine should be connected to an earthed 3 pin wall socket.
• If the power-cord should ever need replacing, use only a genuine cord available from
the nearest Defy Service Centre.