Defy Appliances 600 STE Maintenance, Lift-off oven door, Removing the inner door glass

MAINTENANCE

Lift-off oven door

•The oven door may be removed to improve access to the oven cavity and facilitate cleaning.

•Open the door fully, turn the appropriate washers to lock the two hinges (see sketch) and, using both hands, lift the door out as shown.

•After cleaning, refit in reverse order.

Removing the inner door glass.

•The glass may be removed for cleaning purposes by removing the two screws which hold it in place.

•It is now possible to clean the inside of the outer glass if required.

•Wash the glass in hot soapy water, rinse and dry.

•Re-assemble by carefully locating the rubber seal in the embossed groove before fitting the glass. The glass is marked “THIS SIDE TOWARDS OVEN”.

•Re-fit the two securing screws.

Removing the side racks and shelves

•The side racks and shelves may be removed for cleaning purposes.

•Remove the bottom bake element guard.

•Slide the shelves and bake trays out fully against the shelf stop.

•Lift the front slightly and slide it out

•The side racks may be removed by pulling the retainer rod slightly downwards thereby dislodging it from the retainer lug at the bottom centre. Lift the racks free of the retaining slots in the oven wall.

•Replace in reverse order.