Defy Appliances 621, 711S SPIRAL PLATES 620 Kitchenaire, Warmer Drawer, Spiral Plate Care

SPIRAL PLATES (620 Kitchenaire)

•The markings around the plate control knobs represent the following heat settings:

•Position 1-4 = Gentle simmer to simmer.

•Position 4-6 = Fast simmer to medium heat

•Position 6-8 = Hot to maximum heat

•The relevant plate indicator light will glow when a plate is switched on.

SPIRAL PLATE CARE

•Use pots with a base diameter slightly larger than the plate. This will ensure even heat distribution and prevent spillage from dripping onto and staining the plate.

•Always cover the pot with a lid as this will conserve energy and minimise spillage.

CLEANING SPIRAL PLATES

•Switch off the electrical supply point to the stove.

•When the plates are cold, lift the hinged spiral plate up and remove the supports, under-cups and trims.

•Use hot soapy water to clean the plates, plate supports, trims and under-cups.

•Use a nylon brush on badly soiled items.

•Wipe dry after cleaning and replace items.

WARMER DRAWER

•The warming drawer has a rotary on off switch control. An indicator light will glow when the drawer has been switched on.

•Food left for too long in the warmer drawer could dry out and spoil. As a precaution food should always be covered, to minimise the drying effect.

•The drawer can be removed for cleaning purposes. Pull the drawer out to the bump- stop, then lift the front slightly and continue pulling till the drawer slides free.

•Refit by lifting the rear of the drawer over the bump-stop and then sliding it back.